At present, users with TEKTRONIX or IMLAC terminals or with systems that support the proposed level 0 graphics protocol can access UCSB graphics. Listed below are the ICP sockets for the currently supported terminals and protocols. Any detailed questions about or problems with a particular protocol should be directed to Ed Faeh (805-961-4047).

   Socket                       Supports
   
   x'701'               IMLAC with special software designed
                        by Jerry Powell (MITRE Corp.).
                        Graphics is sent over a simplex
                        connection to the IMLAC.  Alphanumerics
                        are sent over a TELNET-like connection
                        to a separate device.  The IMLAC
                        software can be loaded from MIT-DMCG.
   
   x'703'               IMLAC with 80x80 display grid
                        and Standard Text and Edit Package.
                        Some IMLACs have a 64x64 display grid.
                        Therefore, the choice may be made in
                        the near future to format the
                        graphics output from this connection
                        for the smaller grid resolution so
                        that both terminal types may be handled.
                        Display resolution is limited with
                        this terminal configuration as
                        normal UCSB terminals have 1024x1024
                        grid.  Nevertheless, meaningful
                        displays are obtained even at the
                        lower resolutions.
   
   x'705'               Current Level 0 graphics protocol.
   
   x'707'               Same as x'701' but with special
                        UCSB online keyboard as input.
                        This configuration averts the
                        necessity of spelling out online
                        operators.
   
   x'709'               Same as x'705' but with special
                        UCSB online keyboard as input.
   
   x'801'               TEKTRONIX terminals.  Models 4002-A
                        4010, and T-4002 have been tested
                        successfully.  Presumably all other
                        4002 compatible terminals will also work.

The primary problems that will be encountered by the network user center about display formatting. For historical reasons (i.e. only one type of terminal in house ) no means were included in the system to facilitate terminal independent random positioning of alphanumeric output. Thus, a program which draws and labels a graph neatly on one terminal might label like a kindergartener on other terminals. Nevertheless, this problem can be minimized with careful programming and efforts are underway to provide at least minimal alphanumeric device independence.

Users interested in experimenting with online graphics should contact John Pickens (805-961-3454), Glen Davis (805-961-2462), or Mark Krilonovich (805-961-3454). Suggestions and criticisms of all aspects of the UCSB OnLine - Network User interface are desired.

       [ This RFC was put into machine readable form for entry ]
       [ into the online RFC archives by BBN Corp. under the   ]
       [ direction of Alex McKenzie.                      1/97 ]