Internet Engineering Task Force (IETF) J. Schoenwaelder Request for Comments: 8194 Jacobs University Bremen Category: Standards Track V. Bajpai ISSN: 2070-1721 Technical University of Munich August 2017 A YANG Data Model for LMAP Measurement Agents Abstract This document defines a data model for Large-Scale Measurement Platforms (LMAPs). The data model is defined using the YANG data modeling language. Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc8194. Copyright Notice Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Schoenwaelder & Bajpai Standards Track [Page 1] RFC 8194 YANG Data Model for LMAP August 2017 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 2 1.2. Tree Diagrams . . . . . . . . . . . . . . . . . . . . . . 2 2. Data Model Overview . . . . . . . . . . . . . . . . . . . . . 3 3. Relationship to the Information Model . . . . . . . . . . . . 9 4. YANG Modules . . . . . . . . . . . . . . . . . . . . . . . . 10 4.1. LMAP Common YANG Module . . . . . . . . . . . . . . . . . 10 4.2. LMAP Control YANG Module . . . . . . . . . . . . . . . . 18 4.3. LMAP Report YANG Module . . . . . . . . . . . . . . . . . 40 5. Security Considerations . . . . . . . . . . . . . . . . . . . 45 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 47 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 48 7.1. Normative References . . . . . . . . . . . . . . . . . . 48 7.2. Informative References . . . . . . . . . . . . . . . . . 49 Appendix A. Example Parameter Extension Module . . . . . . . . . 51 Appendix B. Example Configuration . . . . . . . . . . . . . . . 53 Appendix C. Example Report . . . . . . . . . . . . . . . . . . . 56 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 59 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 59 1. Introduction This document defines a data model for Large-Scale Measurement Platforms (LMAPs) [RFC7594]. The data model is defined using the YANG [RFC7950] data modeling language. It is based on the LMAP Information Model [RFC8193]. 1.1. Terminology This document uses the LMAP terminology defined in [RFC7594]. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 1.2. Tree Diagrams A simplified graphical representation of the data model is used in this document. The meaning of the symbols in these diagrams is as follows: o Brackets "[" and "]" enclose list keys. Schoenwaelder & Bajpai Standards Track [Page 2] RFC 8194 YANG Data Model for LMAP August 2017 o Abbreviations before data node names: "rw" means configuration (read-write), "ro" means state data (read-only), and "w" means RPC input data (write-only). o Symbols after data node names: "?" means an optional node, "!" means a presence container, and "*" denotes a list and leaf-list. o Parentheses enclose choice and case nodes, and case nodes are also marked with a colon (":"). o Ellipsis ("...") stands for contents of subtrees that are not shown. 2. Data Model Overview The LMAP framework has three basic elements: Measurement Agents (MAs), Controllers, and Collectors. Measurement Agents initiate the actual measurements, which are called Measurement Tasks in the LMAP terminology. The Controller instructs one or more MAs and communicates the set of Measurement Tasks an MA should perform and when. The Collector accepts Reports from the MAs with the Results from their Measurement Tasks. The YANG data model for LMAP has been split into three modules: 1. The module ietf-lmap-common.yang provides common definitions such as LMAP-specific data types. 2. The module ietf-lmap-control.yang defines the data structures exchanged between a Controller and Measurement Agents. 3. The module ietf-lmap-report.yang defines the data structures exchanged between Measurement Agents and Collectors. As shown in Figure 1, a Controller, implementing ietf-lmap-common.yang and ietf-lmap-control.yang as a client, will instruct Measurement Agents, which implement ietf-lmap-common.yang and ietf-lmap-control.yang as servers. A Measurement Agent, implementing ietf-lmap-common.yang and ietf-lmap-report.yang, will send results to a Collector, which implements ietf-lmap-common.yang and ietf-lmap-report.yang as a server. Schoenwaelder & Bajpai Standards Track [Page 3] RFC 8194 YANG Data Model for LMAP August 2017 +------------------------+ | LMAP Controller | | | | Client: | | ietf-lmap-common.yang | | ietf-lmap-control.yang | +------------------------+ +------------------------+ | | LMAP Measurement Agent | | | | <- request | | Server: |<---------------------' | ietf-lmap-common.yang | response -> | ietf-lmap-control.yang | | | | | request -> | Client: |----------------------. | ietf-lmap-common.yang | <- response | | ietf-lmap-report.yang | | +------------------------+ v +------------------------+ | LMAP Collector | | | | Server: | | ietf-lmap-common.yang | | ietf-lmap-report.yang | +------------------------+ Figure 1: The LMAP Controller, Measurement Agent, and Collector and the YANG Modules They Implement as Client or Server Schoenwaelder & Bajpai Standards Track [Page 4] RFC 8194 YANG Data Model for LMAP August 2017 The tree diagram below shows the structure of the control data model. module: ietf-lmap-control +--rw lmap +--ro capabilities | +--ro version string | +--ro tag* lmap:tag | +--ro tasks | +--ro task* [name] | +--ro name lmap:identifier | +--ro function* [uri] | | +--ro uri inet:uri | | +--ro role* string | +--ro version? string | +--ro program? string +--rw agent | +--rw agent-id? yang:uuid | +--rw group-id? string | +--rw measurement-point? string | +--rw report-agent-id? boolean | +--rw report-group-id? boolean | +--rw report-measurement-point? boolean | +--rw controller-timeout? uint32 | +--ro last-started yang:date-and-time +--rw tasks | +--rw task* [name] | +--rw name lmap:identifier | +--rw function* [uri] | | +--rw uri inet:uri | | +--rw role* string | +--rw program? string | +--rw option* [id] | | +--rw id lmap:identifier | | +--rw name? string | | +--rw value? string | +--rw tag* lmap:identifier Schoenwaelder & Bajpai Standards Track [Page 5] RFC 8194 YANG Data Model for LMAP August 2017 +--rw schedules | +--rw schedule* [name] | +--rw name lmap:identifier | +--rw start event-ref | +--rw (stop)? | | +--:(end) | | | +--rw end? event-ref | | +--:(duration) | | +--rw duration? uint32 | +--rw execution-mode? enumeration | +--rw tag* lmap:tag | +--rw suppression-tag* lmap:tag | +--ro state enumeration | +--ro storage yang:gauge64 | +--ro invocations yang:counter32 | +--ro suppressions yang:counter32 | +--ro overlaps yang:counter32 | +--ro failures yang:counter32 | +--ro last-invocation? yang:date-and-time | +--rw action* [name] | +--rw name lmap:identifier | +--rw task task-ref | +--rw parameters | | +--rw (extension)? | +--rw option* [id] | | +--rw id lmap:identifier | | +--rw name? string | | +--rw value? string | +--rw destination* schedule-ref | +--rw tag* lmap:tag | +--rw suppression-tag* lmap:tag | +--ro state enumeration | +--ro storage yang:gauge64 | +--ro invocations yang:counter32 | +--ro suppressions yang:counter32 | +--ro overlaps yang:counter32 | +--ro failures yang:counter32 | +--ro last-invocation yang:date-and-time | +--ro last-completion yang:date-and-time | +--ro last-status lmap:status-code | +--ro last-message string | +--ro last-failed-completion yang:date-and-time | +--ro last-failed-status lmap:status-code | +--ro last-failed-message string Schoenwaelder & Bajpai Standards Track [Page 6] RFC 8194 YANG Data Model for LMAP August 2017 +--rw suppressions | +--rw suppression* [name] | +--rw name lmap:identifier | +--rw start? event-ref | +--rw end? event-ref | +--rw match* lmap:glob-pattern | +--rw stop-running? boolean | +--ro state enumeration +--rw events +--rw event* [name] +--rw name lmap:identifier +--rw random-spread? uint32 +--rw cycle-interval? uint32 +--rw (event-type)? +--:(periodic) | +--rw periodic | +--rw interval uint32 | +--rw start? yang:date-and-time | +--rw end? yang:date-and-time +--:(calendar) | +--rw calendar | +--rw month* lmap:month-or-all | +--rw day-of-month* lmap:day-of-months-or-all | +--rw day-of-week* lmap:weekday-or-all | +--rw hour* lmap:hour-or-all | +--rw minute* lmap:minute-or-all | +--rw second* lmap:second-or-all | +--rw timezone-offset? lmap:timezone-offset | +--rw start? yang:date-and-time | +--rw end? yang:date-and-time +--:(one-off) | +--rw one-off | +--rw time yang:date-and-time +--:(immediate) | +--rw immediate empty +--:(startup) | +--rw startup empty +--:(controller-lost) | +--rw controller-lost empty +--:(controller-connected) +--rw controller-connected empty Schoenwaelder & Bajpai Standards Track [Page 7] RFC 8194 YANG Data Model for LMAP August 2017 The tree diagram below shows the structure of the reporting data model. module: ietf-lmap-report rpcs: +---x report +---w input +---w date yang:date-and-time +---w agent-id? yang:uuid +---w group-id? string +---w measurement-point? string +---w result* +---w schedule? lmap:identifier +---w action? lmap:identifier +---w task? lmap:identifier +---w parameters | +---w (extension)? +---w option* [id] | +---w id lmap:identifier | +---w name? string | +---w value? string +---w tag* lmap:tag +---w event? yang:date-and-time +---w start yang:date-and-time +---w end? yang:date-and-time +---w cycle-number? lmap:cycle-number +---w status lmap:status-code +---w conflict* | +---w schedule-name? lmap:identifier | +---w action-name? lmap:identifier | +---w task-name? lmap:identifier +---w table* +---w function* [uri] | +---w uri inet:uri | +---w role* string +---w column* string +---w row* +---w value* string Schoenwaelder & Bajpai Standards Track [Page 8] RFC 8194 YANG Data Model for LMAP August 2017 3. Relationship to the Information Model The LMAP Information Model [RFC8193] is divided into six aspects. They are mapped into the YANG data model as explained below: o Preconfiguration Information: This is not modeled explicitly since bootstrapping information is outside the scope of this data model. Implementations may use some of the Configuration Information also for bootstrapping purposes. o Configuration Information: This is modeled in the /lmap/agent subtree, the /lmap/schedules subtree, and the /lmap/tasks subtree described below. Some items have been left out because they are expected to be dealt with by the underlying protocol. o Instruction Information: This is modeled in the /lmap/suppressions subtree, the /lmap/schedules subtree, and the /lmap/tasks subtree described below. o Logging Information: Some of the Logging Information, in particular 'success/failure/warning messages in response to information updates from the Controller', will be handled by the protocol used to manipulate the LMAP-specific configuration. The LMAP data model defined in this document assumes that runtime Logging Information will be communicated using protocols that do not require a formal data model, e.g., the syslog protocol defined in [RFC5424]. o Capability and Status Information: Some of the Capability and Status Information is modeled in the /lmap/capability subtree. The list of supported Tasks is modeled in the /lmap/capabilities/ task list. Status Information about Schedules and Actions is included in the /lmap/schedules subtree. Information about network interfaces can be obtained from the ietf-interfaces YANG data model [RFC7223]. Information about the hardware and the firmware can be obtained from the ietf-system YANG data model [RFC7317]. A device identifier can be obtained from the ietf- hardware YANG data model [YANG-HARDWARE]. o Reporting Information: This is modeled by the report data model to be implemented by the Collector. Measurement Agents send results to the Collector by invoking an RPC on the Collector. These six Information Model aspects use a collection of common information objects. These common information objects are represented in the YANG data model as follows: o Schedules: Schedules are modeled in the /lmap/schedules subtree. Schoenwaelder & Bajpai Standards Track [Page 9] RFC 8194 YANG Data Model for LMAP August 2017 o Channels: Channels are not modeled since the NETCONF server configuration data model [NETCONF-CLIENT-SERVER] already provides a mechanism to configure NETCONF server Channels. o Task Configurations: Configured Tasks are modeled in the /lmap/ tasks subtree. o Event Information: Event definitions are modeled in the /lmap/ events subtree. 4. YANG Modules 4.1. LMAP Common YANG Module This module imports definitions from [RFC6536], and it references [ISO-8601]. file "ietf-lmap-common@2017-08-08.yang" module ietf-lmap-common { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-lmap-common"; prefix "lmap"; import ietf-inet-types { prefix inet; } organization "IETF Large-Scale Measurement of Broadband Performance Working Group"; contact "WG Web: WG List: Editor: Juergen Schoenwaelder Editor: Vaibhav Bajpai "; description "This module provides common definitions used by the data models written for Large-Scale Measurement Platforms (LMAPs). This module defines typedefs and groupings but no schema tree elements."; Schoenwaelder & Bajpai Standards Track [Page 10] RFC 8194 YANG Data Model for LMAP August 2017 revision "2017-08-08" { description "Initial version"; reference "RFC 8194: A YANG Data Model for LMAP Measurement Agents"; } /* * Typedefs */ typedef identifier { type string { length "1..max"; } description "A string value used to name something."; } typedef tag { type string { length "1..max"; } description "A tag consists of at least one character."; } typedef glob-pattern { type string { length "1..max"; } description 'A glob style pattern (following POSIX.2 fnmatch() without special treatment of file paths): * matches a sequence of characters ? matches a single character [seq] matches any character in seq [!seq] matches any character not in seq A backslash followed by a character matches the following character. In particular: \* matches * \? matches ? \\ matches \ Schoenwaelder & Bajpai Standards Track [Page 11] RFC 8194 YANG Data Model for LMAP August 2017 A sequence seq may be a sequence of characters (e.g., [abc] or a range of characters (e.g., [a-c]).'; } typedef wildcard { type string { pattern '\*'; } description "A wildcard for calendar scheduling entries."; } typedef cycle-number { type string { pattern '[0-9]{8}\.[0-9]{6}'; } description "A cycle number represented in the format YYYYMMDD.HHMMSS where YYYY represents the year, MM the month (1..12), DD the day of the months (01..31), HH the hour (00..23), MM the minute (00..59), and SS the second (00..59). The cycle number is using Coordinated Universal Time (UTC)."; } typedef month { type enumeration { enum january { value 1; description "January of the Gregorian calendar."; } enum february { value 2; description "February of the Gregorian calendar."; } enum march { value 3; description "March of the Gregorian calendar."; } enum april { value 4; description "April of the Gregorian calendar."; } Schoenwaelder & Bajpai Standards Track [Page 12] RFC 8194 YANG Data Model for LMAP August 2017 enum may { value 5; description "May of the Gregorian calendar."; } enum june { value 6; description "June of the Gregorian calendar."; } enum july { value 7; description "July of the Gregorian calendar."; } enum august { value 8; description "August of the Gregorian calendar."; } enum september { value 9; description "September of the Gregorian calendar."; } enum october { value 10; description "October of the Gregorian calendar."; } enum november { value 11; description "November of the Gregorian calendar."; } enum december { value 12; description "December of the Gregorian calendar."; } } description "A type modeling the month in the Gregorian calendar."; } Schoenwaelder & Bajpai Standards Track [Page 13] RFC 8194 YANG Data Model for LMAP August 2017 typedef month-or-all { type union { type month; type wildcard; } description "A month or a wildcard indicating all twelve months."; } typedef day-of-month { type uint8 { range "1..31"; } description "A day of a month of the Gregorian calendar."; } typedef day-of-months-or-all { type union { type day-of-month; type wildcard; } description "A day of a month or a wildcard indicating all days of a month."; } typedef weekday { type enumeration { enum monday { value 1; description "Monday of the Gregorian calendar."; } enum tuesday { value 2; description "Tuesday of the Gregorian calendar."; } enum wednesday { value 3; description "Wednesday of the Gregorian calendar."; } enum thursday { value 4; description "Thursday of the Gregorian calendar."; } Schoenwaelder & Bajpai Standards Track [Page 14] RFC 8194 YANG Data Model for LMAP August 2017 enum friday { value 5; description "Friday of the Gregorian calendar."; } enum saturday { value 6; description "Saturday of the Gregorian calendar."; } enum sunday { value 7; description "Sunday of the Gregorian calendar."; } } description "A type modeling the weekdays in the Gregorian calendar. The numbering follows the ISO 8601 scheme."; reference "ISO 8601:2004: Data elements and interchange formats -- Information interchange -- Representation of dates and times"; } typedef weekday-or-all { type union { type weekday; type wildcard; } description "A weekday or a wildcard indicating all seven weekdays."; } typedef hour { type uint8 { range "0..23"; } description "An hour of a day."; } typedef hour-or-all { type union { type hour; type wildcard; } description "An hour of a day or a wildcard indicating all hours of a day."; Schoenwaelder & Bajpai Standards Track [Page 15] RFC 8194 YANG Data Model for LMAP August 2017 } typedef minute { type uint8 { range "0..59"; } description "A minute of an hour."; } typedef minute-or-all { type union { type minute; type wildcard; } description "A minute of an hour or a wildcard indicating all minutes of an hour."; } typedef second { type uint8 { range "0..59"; } description "A second of a minute."; } typedef second-or-all { type union { type second; type wildcard; } description "A second of a minute or a wildcard indicating all seconds of a minute."; } typedef status-code { type int32; description "A status code returned by the execution of a Task. Note that the actual range is implementation dependent, but it should be portable to use values in the range 0..127 for regular exit codes. By convention, 0 indicates successful termination. Negative values may be used to indicate abnormal termination due to a signal; the absolute value may identify the signal number in this case."; } Schoenwaelder & Bajpai Standards Track [Page 16] RFC 8194 YANG Data Model for LMAP August 2017 typedef timezone-offset { type string { pattern 'Z|[\+\-]\d{2}:\d{2}'; } description "A time zone offset as it is used by the date-and-time type defined in the ietf-yang-types module. The value Z is equivalent to +00:00. The value -00:00 indicates an unknown time-offset."; reference "RFC 6991: Common YANG Data Types"; } /* * Groupings */ grouping registry-grouping { description "This grouping models a list of entries in a registry that identify functions of a Task."; list function { key uri; description "A list of entries in a registry identifying functions."; leaf uri { type inet:uri; description "A URI identifying an entry in a registry."; } leaf-list role { type string; description "A set of roles for the identified registry entry."; } } } grouping options-grouping { description "A list of options of a Task. Each option is a name/value pair (where the value may be absent)."; list option { key "id"; Schoenwaelder & Bajpai Standards Track [Page 17] RFC 8194 YANG Data Model for LMAP August 2017 ordered-by user; description "A list of options passed to the Task. It is a list of key/value pairs and may be used to model options. Options may be used to identify the role of a Task or to pass a Channel name to a Task."; leaf id { type lmap:identifier; description "An identifier uniquely identifying an option. This identifier is required by YANG to uniquely identify a name/value pair, but it otherwise has no semantic value"; } leaf name { type string; description "The name of the option."; } leaf value { type string; description "The value of the option."; } } } } 4.2. LMAP Control YANG Module This module imports definitions from [RFC6536], [RFC6991], and the common LMAP module, and it references [RFC7398]. file "ietf-lmap-control@2017-08-08.yang" module ietf-lmap-control { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-lmap-control"; prefix "lmapc"; import ietf-yang-types { prefix yang; } import ietf-netconf-acm { Schoenwaelder & Bajpai Standards Track [Page 18] RFC 8194 YANG Data Model for LMAP August 2017 prefix nacm; } import ietf-lmap-common { prefix lmap; } organization "IETF Large-Scale Measurement of Broadband Performance Working Group"; contact "WG Web: WG List: Editor: Juergen Schoenwaelder Editor: Vaibhav Bajpai "; description "This module defines a data model for controlling Measurement Agents that are part of a Large-Scale Measurement Platform (LMAP). This data model is expected to be implemented by Measurement Agents."; revision "2017-08-08" { description "Initial version"; reference "RFC 8194: A YANG Data Model for LMAP Measurement Agents"; } /* * Typedefs */ typedef event-ref { type leafref { path "/lmap/events/event/name"; } description "This type is used by data models that need to reference a configured event source."; } typedef task-ref { type leafref { Schoenwaelder & Bajpai Standards Track [Page 19] RFC 8194 YANG Data Model for LMAP August 2017 path "/lmap/tasks/task/name"; } description "This type is used by data models that need to reference a configured Task."; } typedef schedule-ref { type leafref { path "/lmap/schedules/schedule/name"; } description "This type is used by data models that need to reference a configured Schedule."; } /* * Groupings */ grouping start-end-grouping { description "A grouping that provides start and end times for Event objects."; leaf start { type yang:date-and-time; description "The date and time when the Event object starts to create triggers."; } leaf end { type yang:date-and-time; description "The date and time when the Event object stops to create triggers. It is generally a good idea to always configure an end time and to refresh the end time as needed to ensure that agents that lose connectivity to their Controller do not continue executing Schedules forever."; } } /* * Capability, configuration, and state data nodes */ Schoenwaelder & Bajpai Standards Track [Page 20] RFC 8194 YANG Data Model for LMAP August 2017 container lmap { description "Configuration and control of a Measurement Agent."; container capabilities { config false; description "Agent capabilities including a list of supported Tasks."; leaf version { type string; config false; mandatory true; description "A short description of the software implementing the Measurement Agent. This should include the version number of the Measurement Agent software."; } leaf-list tag { type lmap:tag; config false; description "An optional unordered set of tags that provide additional information about the capabilities of the Measurement Agent."; } container tasks { description "A list of Tasks that the Measurement Agent supports."; list task { key name; description "The list of Tasks supported by the Measurement Agent."; leaf name { type lmap:identifier; description "The unique name of a Task capability."; } uses lmap:registry-grouping; leaf version { type string; Schoenwaelder & Bajpai Standards Track [Page 21] RFC 8194 YANG Data Model for LMAP August 2017 description "A short description of the software implementing the Task. This should include the version number of the Measurement Task software."; } leaf program { type string; description "The (local) program to invoke in order to execute the Task."; } } } } /* * Agent Configuration */ container agent { description "Configuration of parameters affecting the whole Measurement Agent."; leaf agent-id { type yang:uuid; description "The agent-id identifies a Measurement Agent with a very low probability of collision. In certain deployments, the agent-id may be considered sensitive, and hence this object is optional."; } leaf group-id { type string; description "The group-id identifies a group of Measurement Agents. In certain deployments, the group-id may be considered less sensitive than the agent-id."; } leaf measurement-point { type string; description "The measurement point indicating where the Measurement Agent is located on a path."; Schoenwaelder & Bajpai Standards Track [Page 22] RFC 8194 YANG Data Model for LMAP August 2017 reference "RFC 7398: A Reference Path and Measurement Points for Large-Scale Measurement of Broadband Performance"; } leaf report-agent-id { type boolean; must '. != "true" or ../agent-id' { description "An agent-id must exist for this to be set to true."; } default false; description "The 'report-agent-id' controls whether the 'agent-id' is reported to Collectors."; } leaf report-group-id { type boolean; must '. != "true" or ../group-id' { description "A group-id must exist for this to be set to true."; } default false; description "The 'report-group-id' controls whether the 'group-id' is reported to Collectors."; } leaf report-measurement-point { type boolean; must '. != "true" or ../measurement-point' { description "A measurement-point must exist for this to be set to true."; } default false; description "The 'report-measurement-point' controls whether the 'measurement-point' is reported to Collectors."; } leaf controller-timeout { type uint32; units "seconds"; Schoenwaelder & Bajpai Standards Track [Page 23] RFC 8194 YANG Data Model for LMAP August 2017 description "A timer is started after each successful contact with a Controller. When the timer reaches the controller-timeout, an event (controller-lost) is raised indicating that connectivity to the Controller has been lost."; } leaf last-started { type yang:date-and-time; config false; mandatory true; description "The date and time the Measurement Agent last started."; } } /* * Task Configuration */ container tasks { description "Configuration of LMAP Tasks."; list task { key name; description "The list of Tasks configured on the Measurement Agent. Note that a configured Task MUST resolve to a Task listed in the capabilities. Attempts to execute a configured Task that is not listed in the capabilities result in a runtime execution error."; leaf name { type lmap:identifier; description "The unique name of a Task."; } uses lmap:registry-grouping; leaf program { type string; nacm:default-deny-write; Schoenwaelder & Bajpai Standards Track [Page 24] RFC 8194 YANG Data Model for LMAP August 2017 description "The (local) program to invoke in order to execute the Task. If this leaf is not set, then the system will try to identify a suitable program based on the registry information present."; } uses lmap:options-grouping { description "The list of Task-specific options."; } leaf-list tag { type lmap:identifier; description "A set of Task-specific tags that are reported together with the measurement results to a Collector. A tag can be used, for example, to carry the Measurement Cycle ID."; } } } /* * Schedule Instructions */ container schedules { description "Configuration of LMAP Schedules. Schedules control which Tasks are executed by the LMAP implementation."; list schedule { key name; description "Configuration of a particular Schedule."; leaf name { type lmap:identifier; description "The locally unique, administratively assigned name for this Schedule."; } leaf start { type event-ref; mandatory true; Schoenwaelder & Bajpai Standards Track [Page 25] RFC 8194 YANG Data Model for LMAP August 2017 description "The event source controlling the start of the scheduled Actions."; } choice stop { description "This choice contains optional leafs that control the graceful forced termination of scheduled Actions. When the end has been reached, the scheduled Actions should be forced to terminate the measurements. This may involve being active some additional time in order to properly finish the Action's activity (e.g., waiting for any messages that are still outstanding)."; leaf end { type event-ref; description "The event source controlling the graceful forced termination of the scheduled Actions."; } leaf duration { type uint32; units "seconds"; description "The duration controlling the graceful forced termination of the scheduled Actions."; } } leaf execution-mode { type enumeration { enum sequential { value 1; description "The Actions of the Schedule are executed sequentially."; } enum parallel { value 2; description "The Actions of the Schedule are executed concurrently."; } enum pipelined { value 3; Schoenwaelder & Bajpai Standards Track [Page 26] RFC 8194 YANG Data Model for LMAP August 2017 description "The Actions of the Schedule are executed in a pipelined mode. Output created by an Action is passed as input to the subsequent Action."; } } default pipelined; description "The execution mode of this Schedule determines in which order the Actions of the Schedule are executed."; } leaf-list tag { type lmap:tag; description "A set of Schedule-specific tags that are reported together with the measurement results to a Collector."; } leaf-list suppression-tag { type lmap:tag; description "A set of Suppression tags that are used to select Schedules to be suppressed."; } leaf state { type enumeration { enum enabled { value 1; description "The value 'enabled' indicates that the Schedule is currently enabled."; } enum disabled { value 2; description "The value 'disabled' indicates that the Schedule is currently disabled."; } enum running { value 3; description "The value 'running' indicates that the Schedule is currently running."; } enum suppressed { value 4; Schoenwaelder & Bajpai Standards Track [Page 27] RFC 8194 YANG Data Model for LMAP August 2017 description "The value 'suppressed' indicates that the Schedule is currently suppressed."; } } config false; mandatory true; description "The current state of the Schedule."; } leaf storage { type yang:gauge64; units "bytes"; config false; mandatory true; description "The amount of secondary storage (e.g., allocated in a file system) holding temporary data allocated to the Schedule in bytes. This object reports the amount of allocated physical storage and not the storage used by logical data records."; } leaf invocations { type yang:counter32; config false; mandatory true; description "Number of invocations of this Schedule. This counter does not include suppressed invocations or invocations that were prevented due to an overlap with a previous invocation of this Schedule."; } leaf suppressions { type yang:counter32; config false; mandatory true; description "Number of suppressed executions of this Schedule."; } leaf overlaps { type yang:counter32; config false; mandatory true; Schoenwaelder & Bajpai Standards Track [Page 28] RFC 8194 YANG Data Model for LMAP August 2017 description "Number of executions prevented due to overlaps with a previous invocation of this Schedule."; } leaf failures { type yang:counter32; config false; mandatory true; description "Number of failed executions of this Schedule. A failed execution is an execution where at least one Action failed."; } leaf last-invocation { type yang:date-and-time; config false; description "The date and time of the last invocation of this Schedule."; } list action { key name; description "An Action describes a Task that is invoked by the Schedule. Multiple Actions are invoked according to the execution-mode of the Schedule."; leaf name { type lmap:identifier; description "The unique identifier for this Action."; } leaf task { type task-ref; mandatory true; description "The Task invoked by this Action."; } container parameters { description "This container is a placeholder for runtime parameters defined in Task-specific data models augmenting the base LMAP control data model."; Schoenwaelder & Bajpai Standards Track [Page 29] RFC 8194 YANG Data Model for LMAP August 2017 choice extension { description "This choice is provided to augment in different sets of parameters."; } } uses lmap:options-grouping { description "The list of Action-specific options that are appended to the list of Task-specific options."; } leaf-list destination { type schedule-ref; description "A set of Schedules receiving the output produced by this Action. The output is stored temporarily since the Destination Schedules will in general not be running when output is passed to them. The behavior of an Action passing data to its own Schedule is implementation specific. Data passed to a sequential or pipelined Schedule is received by the Schedule's first Action. Data passed to a parallel Schedule is received by all Actions of the Schedule."; } leaf-list tag { type lmap:tag; description "A set of Action-specific tags that are reported together with the measurement results to a Collector."; } leaf-list suppression-tag { type lmap:tag; description "A set of Suppression tags that are used to select Actions to be suppressed."; } leaf state { type enumeration { enum enabled { value 1; Schoenwaelder & Bajpai Standards Track [Page 30] RFC 8194 YANG Data Model for LMAP August 2017 description "The value 'enabled' indicates that the Action is currently enabled."; } enum disabled { value 2; description "The value 'disabled' indicates that the Action is currently disabled."; } enum running { value 3; description "The value 'running' indicates that the Action is currently running."; } enum suppressed { value 4; description "The value 'suppressed' indicates that the Action is currently suppressed."; } } config false; mandatory true; description "The current state of the Action."; } leaf storage { type yang:gauge64; units "bytes"; config false; mandatory true; description "The amount of secondary storage (e.g., allocated in a file system) holding temporary data allocated to the Schedule in bytes. This object reports the amount of allocated physical storage and not the storage used by logical data records."; } leaf invocations { type yang:counter32; config false; mandatory true; Schoenwaelder & Bajpai Standards Track [Page 31] RFC 8194 YANG Data Model for LMAP August 2017 description "Number of invocations of this Action. This counter does not include suppressed invocations or invocations that were prevented due to an overlap with a previous invocation of this Action."; } leaf suppressions { type yang:counter32; config false; mandatory true; description "Number of suppressed executions of this Action."; } leaf overlaps { type yang:counter32; config false; mandatory true; description "Number of executions prevented due to overlaps with a previous invocation of this Action."; } leaf failures { type yang:counter32; config false; mandatory true; description "Number of failed executions of this Action."; } leaf last-invocation { type yang:date-and-time; config false; mandatory true; description "The date and time of the last invocation of this Action."; } leaf last-completion { type yang:date-and-time; config false; mandatory true; description "The date and time of the last completion of this Action."; Schoenwaelder & Bajpai Standards Track [Page 32] RFC 8194 YANG Data Model for LMAP August 2017 } leaf last-status { type lmap:status-code; config false; mandatory true; description "The status code returned by the last execution of this Action."; } leaf last-message { type string; config false; mandatory true; description "The status message produced by the last execution of this Action."; } leaf last-failed-completion { type yang:date-and-time; config false; mandatory true; description "The date and time of the last failed completion of this Action."; } leaf last-failed-status { type lmap:status-code; config false; mandatory true; description "The status code returned by the last failed execution of this Action."; } leaf last-failed-message { type string; config false; mandatory true; description "The status message produced by the last failed execution of this Action."; } } } Schoenwaelder & Bajpai Standards Track [Page 33] RFC 8194 YANG Data Model for LMAP August 2017 } /* * Suppression Instructions */ container suppressions { description "Suppression information to prevent Schedules or certain Actions from starting."; list suppression { key name; description "Configuration of a particular Suppression."; leaf name { type lmap:identifier; description "The locally unique, administratively assigned name for this Suppression."; } leaf start { type event-ref; description "The event source controlling the start of the Suppression period."; } leaf end { type event-ref; description "The event source controlling the end of the Suppression period. If not present, Suppression continues indefinitely."; } leaf-list match { type lmap:glob-pattern; description "A set of Suppression match patterns. The Suppression will apply to all Schedules (and their Actions) that have a matching value in their suppression-tags and to all Actions that have a matching value in their suppression-tags."; } Schoenwaelder & Bajpai Standards Track [Page 34] RFC 8194 YANG Data Model for LMAP August 2017 leaf stop-running { type boolean; default false; description "If 'stop-running' is true, running Schedules and Actions matching the Suppression will be terminated when Suppression is activated. If 'stop-running' is false, running Schedules and Actions will not be affected if Suppression is activated."; } leaf state { type enumeration { enum enabled { value 1; description "The value 'enabled' indicates that the Suppression is currently enabled."; } enum disabled { value 2; description "The value 'disabled' indicates that the Suppression is currently disabled."; } enum active { value 3; description "The value 'active' indicates that the Suppression is currently active."; } } config false; mandatory true; description "The current state of the Suppression."; } } } /* * Event Instructions */ container events { description "Configuration of LMAP events. Schoenwaelder & Bajpai Standards Track [Page 35] RFC 8194 YANG Data Model for LMAP August 2017 Implementations may be forced to delay acting upon the occurrence of events in the face of local constraints. An Action triggered by an event therefore should not rely on the accuracy provided by the scheduler implementation."; list event { key name; description "The list of event sources configured on the Measurement Agent."; leaf name { type lmap:identifier; description "The unique name of an event source."; } leaf random-spread { type uint32; units seconds; description "This optional leaf adds a random spread to the computation of the event's trigger time. The random spread is a uniformly distributed random number taken from the interval [0:random-spread]."; } leaf cycle-interval { type uint32; units seconds; description "The optional cycle-interval defines the duration of the time interval in seconds that is used to calculate cycle numbers. No cycle number is calculated if the optional cycle-interval does not exist."; } choice event-type { description "Different types of events are handled by different branches of this choice. Note that this choice can be extended via augmentations."; case periodic { container periodic { Schoenwaelder & Bajpai Standards Track [Page 36] RFC 8194 YANG Data Model for LMAP August 2017 description "A periodic timing object triggers periodically according to a regular interval."; leaf interval { type uint32 { range "1..max"; } units "seconds"; mandatory true; description "The number of seconds between two triggers generated by this periodic timing object."; } uses start-end-grouping; } } case calendar { container calendar { description "A calendar timing object triggers based on the current calendar date and time."; leaf-list month { type lmap:month-or-all; min-elements 1; description "A set of months at which this calendar timing will trigger. The wildcard means all months."; } leaf-list day-of-month { type lmap:day-of-months-or-all; min-elements 1; description "A set of days of the month at which this calendar timing will trigger. The wildcard means all days of a month."; } leaf-list day-of-week { type lmap:weekday-or-all; min-elements 1; description "A set of weekdays at which this calendar timing will trigger. The wildcard means all weekdays."; } Schoenwaelder & Bajpai Standards Track [Page 37] RFC 8194 YANG Data Model for LMAP August 2017 leaf-list hour { type lmap:hour-or-all; min-elements 1; description "A set of hours at which this calendar timing will trigger. The wildcard means all hours of a day."; } leaf-list minute { type lmap:minute-or-all; min-elements 1; description "A set of minutes at which this calendar timing will trigger. The wildcard means all minutes of an hour."; } leaf-list second { type lmap:second-or-all; min-elements 1; description "A set of seconds at which this calendar timing will trigger. The wildcard means all seconds of a minute."; } leaf timezone-offset { type lmap:timezone-offset; description "The time zone in which this calendar timing object will be evaluated. If not present, the system's local time zone will be used."; } uses start-end-grouping; } } case one-off { container one-off { description "A one-off timing object triggers exactly once."; leaf time { type yang:date-and-time; mandatory true; description "This one-off timing object triggers once at the configured date and time."; Schoenwaelder & Bajpai Standards Track [Page 38] RFC 8194 YANG Data Model for LMAP August 2017 } } } case immediate { leaf immediate { type empty; mandatory true; description "This immediate Event object triggers immediately when it is configured."; } } case startup { leaf startup { type empty; mandatory true; description "This startup Event object triggers whenever the Measurement Agent (re)starts."; } } case controller-lost { leaf controller-lost { type empty; mandatory true; description "The controller-lost Event object triggers when the connectivity to the Controller has been lost for at least 'controller-timeout' seconds."; } } case controller-connected { leaf controller-connected { type empty; mandatory true; description "The controller-connected Event object triggers when the connectivity to the Controller has been restored after it was lost for at least 'controller-timeout' seconds."; } } } Schoenwaelder & Bajpai Standards Track [Page 39] RFC 8194 YANG Data Model for LMAP August 2017 } } } } 4.3. LMAP Report YANG Module This module imports definitions from [RFC6536] and the common LMAP module. file "ietf-lmap-report@2017-08-08.yang" module ietf-lmap-report { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-lmap-report"; prefix "lmapr"; import ietf-yang-types { prefix yang; } import ietf-lmap-common { prefix lmap; } organization "IETF Large-Scale Measurement of Broadband Performance Working Group"; contact "WG Web: WG List: Editor: Juergen Schoenwaelder Editor: Vaibhav Bajpai "; description "This module defines a data model for reporting results from Measurement Agents, which are part of a Large-Scale Measurement Platform (LMAP), to result data Collectors. This data model is expected to be implemented by a Collector."; revision "2017-08-08" { description "Initial version"; Schoenwaelder & Bajpai Standards Track [Page 40] RFC 8194 YANG Data Model for LMAP August 2017 reference "RFC 8194: A YANG Data Model for LMAP Measurement Agents"; } rpc report { description "The report operation is used by a Measurement Agent to submit measurement results produced by Measurement Tasks to a Collector."; input { leaf date { type yang:date-and-time; mandatory true; description "The date and time when this result report was sent to a Collector."; } leaf agent-id { type yang:uuid; description "The agent-id of the agent from which this report originates."; } leaf group-id { type string; description "The group-id of the agent from which this report originates."; } leaf measurement-point { type string; description "The measurement-point of the agent from which this report originates."; } list result { description "The list of Tasks for which results are reported."; leaf schedule { type lmap:identifier; Schoenwaelder & Bajpai Standards Track [Page 41] RFC 8194 YANG Data Model for LMAP August 2017 description "The name of the Schedule that produced the result."; } leaf action { type lmap:identifier; description "The name of the Action in the Schedule that produced the result."; } leaf task { type lmap:identifier; description "The name of the Task that produced the result."; } container parameters { description "This container is a placeholder for runtime parameters defined in Task-specific data models augmenting the base LMAP report data model."; choice extension { description "This choice is provided to augment in different sets of parameters."; } } uses lmap:options-grouping { description "The list of options there were in use when the measurement was performed. This list must include both the Task-specific options as well as the Action-specific options."; } leaf-list tag { type lmap:tag; description "A tag contains additional information that is passed with the result record to the Collector. This is the joined set of tags defined for the Task object, the Schedule object, and the Action object. A tag can be used to carry the Measurement Cycle ID."; } Schoenwaelder & Bajpai Standards Track [Page 42] RFC 8194 YANG Data Model for LMAP August 2017 leaf event { type yang:date-and-time; description "The date and time of the event that triggered the Schedule of the Action that produced the reported result values. The date and time does not include any added randomization."; } leaf start { type yang:date-and-time; mandatory true; description "The date and time when the Task producing this result started."; } leaf end { type yang:date-and-time; description "The date and time when the Task producing this result finished."; } leaf cycle-number { type lmap:cycle-number; description "The optional cycle number is the time closest to the time reported in the event leaf that is a multiple of the cycle-interval of the event that triggered the execution of the Schedule. The value is only present if the event that triggered the execution of the Schedule has a defined cycle-interval."; } leaf status { type lmap:status-code; mandatory true; description "The status code returned by the execution of this Action."; } list conflict { description "The names of Tasks overlapping with the execution of the Task that has produced this result."; Schoenwaelder & Bajpai Standards Track [Page 43] RFC 8194 YANG Data Model for LMAP August 2017 leaf schedule-name { type lmap:identifier; description "The name of a Schedule that might have impacted the execution of the Task that has produced this result."; } leaf action-name { type lmap:identifier; description "The name of an Action within the Schedule that might have impacted the execution of the Task that has produced this result."; } leaf task-name { type lmap:identifier; description "The name of the Task executed by an Action within the Schedule that might have impacted the execution of the Task that has produced this result."; } } list table { description "A list of result tables."; uses lmap:registry-grouping; leaf-list column { type string; description "An ordered list of column labels. The order is determined by the system and must match the order of the columns in the result rows."; } list row { description "The rows of a result table."; leaf-list value { type string; description "The value of a cell in the result row."; } Schoenwaelder & Bajpai Standards Track [Page 44] RFC 8194 YANG Data Model for LMAP August 2017 } } } } } } 5. Security Considerations The YANG module defined in this document is designed to be accessed via network management protocols such as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is Transport Layer Security (TLS) [RFC5246]. The NETCONF access control model [RFC6536] provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content. There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability: /lmap/agent This subtree configures general properties of the Measurement Agent such as its identity, measurement point, or Controller timeout. This subtree should only have write access for the system responsible for configuring the Measurement Agent. /lmap/tasks This subtree configures the Tasks that can be invoked by a Controller. This subtree should only have write access for the system responsible for configuring the Measurement Agent. Care must be taken to not expose Tasks to a Controller that can cause damage to the system or the network. Schoenwaelder & Bajpai Standards Track [Page 45] RFC 8194 YANG Data Model for LMAP August 2017 /lmap/schedules This subtree is used by a Controller to define the Schedules and Actions that are executed when certain events occur. Unauthorized access can cause unwanted load on the device or network, or it might direct measurement traffic to targets that become victims of an attack. /lmap/suppressions This subtree is used by a Controller to define Suppressions that can temporarily disable the execution of Schedules or Actions. Unauthorized access can either disable measurements that should normally take place or cause measurements to take place during times when normally no measurements should take place. /lmap/events This subtree is used by a Controller to define events that trigger the execution of Schedules and Actions. Unauthorized access can either disable measurements that should normally take place or cause measurements to take place during times when normally no measurements should take place or at a frequency that is higher than normally expected. Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability: /lmap/agent This subtree provides information about the Measurement Agent. This information may be used to select specific targets for attacks. /lmap/capabilities This subtree provides information about the capabilities of the Measurement Agent, including its software version number and the Tasks that it supports. This information may be used to execute targeted attacks against specific implementations. /lmap/schedules This subtree provides information about the Schedules and their associated Actions executed on the Measurement Agent. This information may be used to check whether attacks against the implementation are effective. Schoenwaelder & Bajpai Standards Track [Page 46] RFC 8194 YANG Data Model for LMAP August 2017 /lmap/suppressions This subtree provides information about the Suppressions that can be active on the Measurement Agent. This information may be used to predict time periods where measurements take place (or do not take place). Some of the RPC operations in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control access to these operations. These are the operations and their sensitivity/vulnerability: /report The report operation is used to send locally collected measurement results to a remote Collector. Unauthorized access may leak measurement results, including those from passive measurements. The data model uses a number of identifiers that are set by the Controller. Implementors may find these identifiers useful for the identification of resources, e.g., to identify objects in a file system providing temporary storage. Since the identifiers used by the YANG data model may allow characters that may be given special interpretation in a specific context, implementations must ensure that identifiers are properly mapped into safe identifiers. The data model allows specifying options in the form of name/value pairs that are passed to programs. Implementors ought to take care that option names and values are passed literally to programs. In particular, shell expansions that may alter option names and values must not be performed. 6. IANA Considerations This document registers three URIs in the "IETF XML Registry" [RFC3688]. Following the format in RFC 3688, the following registrations have been made. URI: urn:ietf:params:xml:ns:yang:ietf-lmap-common Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace. URI: urn:ietf:params:xml:ns:yang:ietf-lmap-control Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace. URI: urn:ietf:params:xml:ns:yang:ietf-lmap-report Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace. Schoenwaelder & Bajpai Standards Track [Page 47] RFC 8194 YANG Data Model for LMAP August 2017 This document registers three YANG modules in the "YANG Module Names" registry [RFC6020]. Name: ietf-lmap-common Namespace: urn:ietf:params:xml:ns:yang:ietf-lmap-common Prefix: lmap Reference: RFC 8194 Name: ietf-lmap-control Namespace: urn:ietf:params:xml:ns:yang:ietf-lmap-control Prefix: lmapc Reference: RFC 8194 Name: ietf-lmap-report Namespace: urn:ietf:params:xml:ns:yang:ietf-lmap-report Prefix: lmapr Reference: RFC 8194 7. References 7.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008, . [RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, October 2010, . [RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed., and A. Bierman, Ed., "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011, . [RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011, . Schoenwaelder & Bajpai Standards Track [Page 48] RFC 8194 YANG Data Model for LMAP August 2017 [RFC6536] Bierman, A. and M. Bjorklund, "Network Configuration Protocol (NETCONF) Access Control Model", RFC 6536, DOI 10.17487/RFC6536, March 2012, . [RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types", RFC 6991, DOI 10.17487/RFC6991, July 2013, . [RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, August 2016, . [RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8193] Burbridge, T., Eardley, P., Bagnulo, M., and J. Schoenwaelder, "Information Model for Large-Scale Measurement Platforms (LMAPs)", DOI 10.17487/RFC8193, RFC 8193, August 2017, . 7.2. Informative References [ISO-8601] International Organization for Standardization, "Data elements and interchange formats -- Information interchange -- Representation of dates and times", ISO Standard 8601:2004, December 2004. [NETCONF-CLIENT-SERVER] Watsen, K., Wu, G., and J. Schoenwaelder, "NETCONF Client and Server Models", Work in Progress, draft-ietf-netconf- netconf-client-server-04, July 2017. [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004, . [RFC5424] Gerhards, R., "The Syslog Protocol", RFC 5424, DOI 10.17487/RFC5424, March 2009, . Schoenwaelder & Bajpai Standards Track [Page 49] RFC 8194 YANG Data Model for LMAP August 2017 [RFC7223] Bjorklund, M., "A YANG Data Model for Interface Management", RFC 7223, DOI 10.17487/RFC7223, May 2014, . [RFC7317] Bierman, A. and M. Bjorklund, "A YANG Data Model for System Management", RFC 7317, DOI 10.17487/RFC7317, August 2014, . [RFC7398] Bagnulo, M., Burbridge, T., Crawford, S., Eardley, P., and A. Morton, "A Reference Path and Measurement Points for Large-Scale Measurement of Broadband Performance", RFC 7398, DOI 10.17487/RFC7398, February 2015, . [RFC7594] Eardley, P., Morton, A., Bagnulo, M., Burbridge, T., Aitken, P., and A. Akhter, "A Framework for Large-Scale Measurement of Broadband Performance (LMAP)", RFC 7594, DOI 10.17487/RFC7594, September 2015, . [W3C.REC-xml-20081126] Bray, T., Paoli, J., Sperberg-McQueen, M., Maler, E., and F. Yergeau, "Extensible Markup Language (XML) 1.0 (Fifth Edition)", World Wide Web Consortium Recommendation REC- xml-20081126, November 2008, . [YANG-HARDWARE] Bierman, A., Bjorklund, M., Dong, J., and D. Romascanu, "A YANG Data Model for Hardware Management", Work in Progress, draft-ietf-netmod-entity-03, March 2017. Schoenwaelder & Bajpai Standards Track [Page 50] RFC 8194 YANG Data Model for LMAP August 2017 Appendix A. Example Parameter Extension Module Sometimes Tasks may require complicated parameters that cannot easily be fit into options, i.e., a list of name/value pairs. In such a situation, it is possible to augment the ietf-lmap-control.yang and ietf-lmap-report.yang data models with definitions for more complex parameters. The following example module demonstrates this idea using the parameters of UDP latency metrics as an example (although UDP latency metric parameters do not really need such an extension module). module example-ietf-ippm-udp-latency { namespace "urn:example:ietf-ippm-udp-latency"; prefix "ippm-udp-latency"; import ietf-inet-types { prefix inet; } import ietf-lmap-control { prefix "lmapc"; } import ietf-lmap-report { prefix "lmapr"; } grouping ippm-udp-latency-parameter-grouping { leaf src-ip { type inet:ip-address; description "The source IP address of the UDP measurement traffic."; } leaf src-port { type inet:port-number; description "The source port number of the UDP measurement traffic."; } leaf dst-ip { type inet:ip-address; description "The destination IP address of the UDP measurement traffic."; } Schoenwaelder & Bajpai Standards Track [Page 51] RFC 8194 YANG Data Model for LMAP August 2017 leaf dst-port { type inet:port-number; description "The destination port number of the UDP measurement traffic."; } leaf poisson-lambda { type decimal64 { fraction-digits 4; } units "seconds"; default 1.0000; description "The average interval for the poisson stream with a resolution of 0.0001 seconds (0.1 ms)."; } leaf poisson-limit { type decimal64 { fraction-digits 4; } units "seconds"; default 30.0000; description "The upper limit on the poisson distribution with a resolution of 0.0001 seconds (0.1 ms)."; } } augment "/lmapc:lmap/lmapc:schedules/lmapc:schedule/lmapc:action" + "/lmapc:parameters/lmapc:extension" { description "This augmentation adds parameters specific to IP Performance Metrics (IPPM) and UDP latency metrics to Actions."; case "ietf-ippm-udp-latency" { uses ippm-udp-latency-parameter-grouping; } } Schoenwaelder & Bajpai Standards Track [Page 52] RFC 8194 YANG Data Model for LMAP August 2017 augment "/lmapr:report/lmapr:input/lmapr:result" + "/lmapr:parameters/lmapr:extension" { description "This augmentation adds parameters specific to IPPM and UDP latency metrics to reports."; case "ietf-ippm-udp-latency" { uses ippm-udp-latency-parameter-grouping; } } } Appendix B. Example Configuration The configuration below is in XML [W3C.REC-xml-20081126]. 550e8400-e29b-41d4-a716-446655440000 true S1 E1 sequential A1 update-ping-targets A2 ping-all-targets S3 measurement:ping S2 E1 parallel Schoenwaelder & Bajpai Standards Track [Page 53] RFC 8194 YANG Data Model for LMAP August 2017 A1 traceroute S3 A2 traceroute S3 measurement:traceroute S3 E2 A1 report orphaned controller-lost controller-connected measurement:* Schoenwaelder & Bajpai Standards Track [Page 54] RFC 8194 YANG Data Model for LMAP August 2017 update-ping-targets fping-update-targets ping-all-targets fping traceroute mtr report lmap-report ippm-udp-latency-client ippm-udp-latency urn:example:tbd client active E1 60 3600000 2016-09-01T00:00:00+00:00 2016-11-01T00:00:00+00:00 Schoenwaelder & Bajpai Standards Track [Page 55] RFC 8194 YANG Data Model for LMAP August 2017 E2 * monday * 4 0 0 +00:00 controller-lost controller-connected Appendix C. Example Report The report below is in XML [W3C.REC-xml-20081126]. 2015-10-28T13:27:42+02:00 550e8400-e29b-41d4-a716-446655440000 S1 A1 update-ping-targets 2016-03-21T10:48:55+01:00 2016-03-21T10:48:57+01:00 0 Schoenwaelder & Bajpai Standards Track [Page 56] RFC 8194 YANG Data Model for LMAP August 2017 S1 A2 ping-all-targets 2016-03-21T10:48:55+01:00 2016-03-21T10:48:57+01:00 0 targetrtt 2001:db8::1 42 2001:db8::2 24
S2 A1 traceroute 2016-03-21T10:48:55+01:00 2016-03-21T10:48:57+01:00 1 hopiprtt 1 2001:638:709:5::1 10.5 2 ? Schoenwaelder & Bajpai Standards Track [Page 57] RFC 8194 YANG Data Model for LMAP August 2017
S2 A2 traceroute 2016-03-21T10:48:55+01:00 2016-03-21T10:48:57+01:00 1 hopiprtt 1 2001:638:709:5::1 11.8 2 ?
Schoenwaelder & Bajpai Standards Track [Page 58] RFC 8194 YANG Data Model for LMAP August 2017 Acknowledgements Several people contributed to this specification by reviewing early draft versions and actively participating in the LMAP Working Group (apologies to those unintentionally omitted): Marcelo Bagnulo, Martin Bjorklund, Trevor Burbridge, Timothy Carey, Alissa Cooper, Philip Eardley, Al Morton, Dan Romascanu, Andrea Soppera, Barbara Stark, and Qin Wu. Juergen Schoenwaelder and Vaibhav Bajpai worked in part on the Leone research project, which received funding from the European Union Seventh Framework Programme [FP7/2007-2013] under grant agreement number 317647. Juergen Schoenwaelder and Vaibhav Bajpai were partly funded by Flamingo, a Network of Excellence project (ICT-318488) supported by the European Commission under its Seventh Framework Programme. Authors' Addresses Juergen Schoenwaelder Jacobs University Bremen Email: j.schoenwaelder@jacobs-university.de Vaibhav Bajpai Technical University of Munich Email: bajpaiv@in.tum.de Schoenwaelder & Bajpai Standards Track [Page 59]