Internet Engineering Task Force (IETF)
Request for Comments: 6941
Category: Informational
ISSN: 2070-1721
L. Fang, Ed.
Cisco
B. Niven-Jenkins, Ed.
Velocix
S. Mansfield, Ed.
Ericsson
R. Graveman, Ed.
RFG Security
April 2013

MPLS Transport Profile (MPLS-TP) Security Framework

Abstract

This document provides a security framework for the MPLS Transport Profile (MPLS-TP). MPLS-TP extends MPLS technologies and introduces new Operations, Administration, and Maintenance (OAM) capabilities, a transport-oriented path protection mechanism, and strong emphasis on static provisioning supported by network management systems. This document addresses the security aspects relevant in the context of MPLS-TP specifically. It describes potential security threats as well as mitigation procedures related to MPLS-TP networks and to MPLS-TP interconnection to other MPLS and GMPLS networks. This document is built on RFC 5920 ("Security Framework for MPLS and GMPLS Networks") by providing additional security considerations that are applicable to the MPLS-TP extensions. All the security considerations from RFC 5920 are assumed to apply.

This document is a product of a joint Internet Engineering Task Force (IETF) / International Telecommunication Union Telecommunication Standardization Sector (ITU-T) effort to include an MPLS Transport Profile within the IETF MPLS and Pseudowire Emulation Edge-to-Edge (PWE3) architectures to support the capabilities and functionality of a packet transport network.

Status of This Memo

This document is not an Internet Standards Track specification; it is published for informational purposes.

This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Not all documents approved by the IESG are a candidate for any level of Internet Standard; see Section 2 of RFC 5741.

Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc6941.

Copyright Notice

Copyright © 2013 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

   1. Introduction ....................................................3
      1.1. Terminology ................................................3
   2. Security Reference Models .......................................4
      2.1. Security Reference Model 1 .................................5
      2.2. Security Reference Model 2 .................................6
   3. Security Threats ................................................9
   4. Defensive Techniques ...........................................10
   5. Security Considerations ........................................12
   6. Acknowledgements ...............................................13
   7. References .....................................................13
      7.1. Normative References ......................................13
      7.2. Informative References ....................................13
   Contributors ......................................................14

1. Introduction

This document provides a security framework for the MPLS Transport Profile (MPLS-TP).

As defined in "Requirements of an MPLS Transport Profile" [RFC5654] and "A Framework for MPLS in Transport Networks" [RFC5921], MPLS-TP uses a subset of MPLS features and introduces extensions to reflect the characteristics of the transport technology. The additional functionality includes in-band OAM, transport-oriented path protection and recovery mechanisms, and new OAM capabilities that were developed for MPLS-TP but that also apply to MPLS and GMPLS. There is strong emphasis in MPLS-TP on static provisioning support through Network Management Systems (NMSs) or Operational Support Systems (OSSs).

This document is built on [RFC5920] by providing additional security considerations that are applicable to the MPLS-TP extensions. The security models, threats, and defense techniques previously defined in [RFC5920] are assumed to apply to general aspects of MPLS-TP.

This document is a product of a joint Internet Engineering Task Force (IETF) / International Telecommunication Union Telecommunication Standardization Sector (ITU-T) effort to include an MPLS Transport Profile within the IETF MPLS and PWE3 architectures to support the capabilities and functionality of a packet transport network.

Readers can refer to [RFC5654] and [RFC5921] for MPLS-TP terminologies and to [RFC5920] for security terminologies that are relevant to MPLS and GMPLS.

1.1. Terminology

   Term       Definition
   ------     -----------------------------------------------
   AC         Attachment Circuit
   BFD        Bidirectional Forwarding Detection
   CE         Customer Edge
   DoS        Denial of Service
   G-ACh      Generic Associated Channel
   GAL        G-ACh Label
   GMPLS      Generalized Multiprotocol Label Switching
   IP         Internet Protocol
   LDP        Label Distribution Protocol
   LSP        Label Switched Path
   NMS        Network Management System
   MPLS       Multiprotocol Label Switching
   MPLS-TP    MPLS Transport Profile
   
   MS-PW      Multi-Segment Pseudowire
   OAM        Operations, Administration, and Maintenance
   PE         Provider Edge
   PSN        Packet-Switched Network
   PW         Pseudowire
   S-PE       PW Switching Provider Edge
   SP         Service Provider
   SS-PW      Single-Segment Pseudowire
   T-PE       PW Terminating Provider Edge

2. Security Reference Models

This section defines reference models for security in MPLS-TP networks.

The models are built on the architecture of MPLS-TP, as defined in [RFC5921]. The placement of SP boundaries plays an important role in determining the security models for any particular deployment.

This document defines a trusted zone as being where a single SP has total operational control over that part of the network. A primary concern is about security aspects that relate to breaches of security from the "outside" of a trusted zone to the "inside" of this zone.

2.1. Security Reference Model 1

In reference model 1, a single SP has total control of the "PE/T-PE to PE/T-PE" part of the MPLS-TP network.

Security reference model 1(a) shows an MPLS-TP network with Single-Segment Pseudowire (SS-PW) from PE1 to PE2. The trusted zone is PE1 to PE2, as illustrated in Figure 1.

           |<-------------- Emulated Service ---------------->|
           |                                                  |
           |          |<------- Pseudowire ------->|          |
           |          |                            |          |
           |          |    |<-- PSN Tunnel -->|    |          |
           |          v    v                  v    v          |
           v    AC    +----+                  +----+     AC   v
     +-----+    |     | PE1|==================| PE2|     |    +-----+
     |     |----------|............PW1.............|----------|     |
     | CE1 |    |     |    |                  |    |     |    | CE2 |
     |     |----------|............PW2.............|----------|     |
     +-----+  ^ |     |    |==================|    |     | ^  +-----+
           ^  |       +----+                  +----+     | |  ^
           |  |   Provider Edge 1         Provider Edge 2  |  |
           |  |                                            |  |
     Customer |                                            |Customer
     Edge 1   |                                            |Edge 2
              |                                            |
        Native service                               Native service
     
     ---Untrusted--- >|<------- Trusted Zone ----->|<---Untrusted----

Figure 1. MPLS-TP Security Model 1(a)

Security reference model 1(b) shows an MPLS-TP network with Multi-Segment Pseudowire (MS-PW) from T-PE1 to T-PE2. The trusted zone is T-PE1 to T-PE2, as illustrated in Figure 2.

         Native  |<-------------Pseudowire------------>|  Native
         Service |                                     |  Service
          (AC)   |     |<- PSN ->|     |<- PSN ->|     |   (AC)
            |    v     v         v     v         v     v     |
            |    +-----+         +-----+         +-----+     |
     +----+ |    |T-PE1|=========|S-PE1|=========|T-PE2|     | +----+
     |    |------|......PW.Seg't1.......PW.Seg't3......|-------|    |
     | CE1| |    |     |         |     |         |     |     | |CE2 |
     |    |------|......PW.Seg't2.......PW.Seg't4......|-------|    |
     +----+ |    |     |=========|     |=========|     |     | +----+
          ^      +-----+    ^    +-----+     ^   +-----+        ^
          |                 |                |                  |
          |               TP LSP            TP LSP              |
          |                                                     |
          |<----------------- Emulated Service ---------------->|
     
     -Untrusted->|<---------- Trusted Zone ----------->|<-Untrusted--

Figure 2. MPLS-TP Security Model 1(b)

2.2. Security Reference Model 2

In reference model 2, a single SP does not have the end-to-end control of the segment from PE/T-PE to PE/T-PE. A given S-PE or T-PE may be under the control of another SP, that SP's customers, or its partners. In this case, the MPLS-TP network is not contained within a single trusted zone.

Security reference model 2(a) shows an MPLS-TP network with Multi-Segment Pseudowire (MS-PW) from T-PE1 to T-PE2. The trusted zone is T-PE1 to S-PE1, as illustrated in Figure 3.

         Native  |<-------------Pseudowire------------>| Native
         Service |                                     | Service
          (AC)   |     |<--PSN-->|     |<--PSN-->|     |  (AC)
            |    V     V         V     V         V     V    |
            |    +-----+         +-----+         +-----+    |
     +----+ |    |T-PE1|=========|S-PE1|=========|T-PE2|    | +----+
     |    |------|......PW.Seg't1.......PW.Seg't3......|------|    |
     | CE1| |    |     |         |     |         |     |    | |CE2 |
     |    |------|......PW.Seg't2.......PW.Seg't4......|------|    |
     +----+ |    |     |=========|     |=========|     |    | +----+
          ^      +-----+    ^    +-----+     ^   +-----+      ^
          |                 |                |                |
          |               TP LSP            TP LSP            |
          |                                                   |
          |<---------------- Emulated Service --------------->|
     
     Untrusted-->|<-- Trusted Zone---->|<---------Untrusted--------

Figure 3. MPLS-TP Security Model 2(a)

Security reference model 2(b) shows an MPLS-TP network with Multi-Segment Pseudowire (MS-PW) from T-PE1 to T-PE2. The trusted zone is the S-PE1 only, as illustrated in Figure 4.

         Native  |<-------------Pseudowire------------>| Native
         Service |                                     | Service
          (AC)   |     |<--PSN-->|     |<--PSN-->|     |  (AC)
            |    V     V         V     V         V     V    |
            |    +-----+         +-----+         +-----+    |
     +----+ |    |T-PE1|=========|S-PE1|=========|T-PE2|    | +----+
     |    |------|......PW.Seg't1.......PW.Seg't3......|------|    |
     | CE1| |    |     |         |     |         |     |    | |CE2 |
     |    |------|......PW.Seg't2.......PW.Seg't4......|------|    |
     +----+ |    |     |=========|     |=========|     |    | +----+
          ^      +-----+    ^    +-----+     ^   +-----+      ^
          |                 |                |                |
          |               TP LSP            TP LSP            |
          |                                                   |
          |<---------------- Emulated Service --------------->|
     
     --------Untrusted---------->|<--->|<-------Untrusted----------
                                 Trusted
                                  Zone

Figure 4. MPLS-TP Security Model 2(b)

Security reference model 2(c) shows an MPLS-TP network with Multi-Segment Pseudowire (MS-PW) from different SPs with inter-provider PW connections. The trusted zone is T-PE1 to S-PE3, as illustrated in Figure 5.

     Native  |<--------------------- PW15 ------------------>| Native
      Layer  |                                               | Layer
    Service  |     |<PSN13>|     |<PSN3X>|     |<PSNXZ>|     | Service
      (AC1)  V     V  LSP  V     V  LSP  V     V  LSP  V     V (AC2)
          |  +-----+  +-+  +-----+       +-----+  +-+  +-----+ |
    +---+ |  |T-PE1|  | |  |S-PE3|       |S-PEX|  | |  |T-PEZ| | +---+
    |   | |  |     |=======|     |=======|     |=======|     | | |   |
    |CE1|----|........PW1........|..PW3..|........PW5........|---|CE2|
    |   | |  |     |=======|     |=======|     |=======|     | | |   |
    +---+    |  1  |  |2|  |  3  |       |  X  |  |Y|  |  Z  |   +---+
             +-----+  +-+  +-----+       +-----+  +-+  +-----+
             |<--Subnetwork 123->|       |<--Subnetwork XYZ->|
   
   Untrusted>|<-- Trusted Zone-->|<-------------Untrusted-------------

Figure 5. MPLS-TP Security Model 2(c)

In general, the boundaries of a trusted zone must be carefully defined when analyzing the security properties of each individual network. The security boundaries determine which reference model should be applied to a given network topology.

3. Security Threats

This section discusses various network security threats that are unique to MPLS-TP and may endanger MPLS-TP networks.

Attacks against a GAL or G-ACh may include the following:

  • GAL or BFD label manipulation, which includes insertion of false labels and modification, deletion, or replay of messages.
  • DoS attacks through in-band OAM by generating excessive G-ACh/GAL and BFD messages that consume significant bandwidth and potentially cause congestion.

These attacks can cause unauthorized protection switchover, inability to restore one or more LSPs, or loss of network connectivity.

When an NMS is used for LSP setup, attacks on the NMS can cause the above effects as well. Although this is not unique to MPLS-TP, MPLS-TP networks can be particularly vulnerable to NMS attacks, due to the fact that static provisioning through NMSs is a commonly used model. In the static provisioning model, a compromised NMS can potentially be comparable to a compromised control plane plus a compromised management plane in the dynamic controlled network model.

Attacks on NMSs may come from either external attackers or insiders. Outside attacks are initiated outside of the trusted zone by unauthorized users of the MPLS-TP NMSs. Insider attacks are initiated from inside the trusted zone by an entity that has authorized access to the management systems but that performs unapproved functions that are harmful to the MPLS-TP networks. These attacks may directly target the NMS; they may also take place via the compromised communication channels between the NMS and the network devices that are being provisioned, or through user access to the provisioning tools. This type of security threat may include disclosure of information, generating false OAM messages, taking down MPLS-TP LSPs, connecting to the wrong MPLS-TP tunnel endpoints, and DoS attacks on the MPLS-TP networks.

There are other more generic security threats, such as unauthorized observation of data traffic (including traffic pattern analysis), modification or deletion of a provider's or user's data, and replay or insertion of inauthentic data into a provider's or user's data stream. These types of attacks apply to MPLS-TP traffic regardless of how the LSP or PW is set up, in a way that is similar to how they apply to MPLS traffic regardless of how the LSP is set up. More details on the above-mentioned threats are documented in [RFC5920].

Such threats may result from malicious behavior or accidental errors:

Example 1: Attacks from users: Users of the MPLS-TP network may

attack the network infrastructure or attack other users.

Example 2: Attacks from insiders: Employees of the operators may

attack the MPLS-TP network, especially through NMSs.

Example 3: Attacks from interconnecting SPs or other partners: Other

SPs may attack the MPLS-TP network, particularly through the inter-provider connections.

Example 4: Attacks as the result of operational errors: Operations

staff may fail to follow operational procedures or may make operational mistakes.

4. Defensive Techniques

The defensive techniques presented in this document and in [RFC5920] are intended to describe methods by which some security threats can be addressed. They are not intended as requirements for all MPLS-TP deployments. The specific operational environment determines the security requirements for any instance of MPLS-TP. Therefore, protocol designers should provide a full set of security capabilities that can be selected and used where appropriate. The MPLS-TP provider should determine the applicability of these techniques to the provider's specific service offerings, and the end user may wish to assess the value of these techniques to the user's service requirements.

Authentication is the primary defense technique to mitigate the risk of the MPLS-TP security threats discussed in Section 3 (GAL or BFD label manipulation, and DoS attacks through in-band OAM). Authentication refers to methods to ensure that message sources are properly identified by the MPLS-TP devices with which they communicate. Authentication includes the following:

  • entity authentication for identity verification
  • management system authentication
  • peer-to-peer authentication
  • message integrity and replay detection to ensure the validity of message streams
  • network-based access controls such as packet filtering and firewalls
  • host-based access controls
  • isolation
  • aggregation
  • protection against denial of service
  • event logging

Section 5.2 of [RFC5920] describes these techniques where they apply to MPLS and GMPLS in general.

In addition to authentication, the following defense should also be considered in order to protect MPLS-TP networks:

  • Use of isolated infrastructure for MPLS-TP

One way to protect the MPLS-TP infrastructure is to use dedicated network resources to provide MPLS-TP transport services. For example, in security model 2 (Section 2.2), the potential risk of attacks on the S-PE1 or T-PE1 in the trusted zone may be reduced by using non-IP-based communication paths, so that the paths in the trusted zone cannot be reached from the outside via IP.

  • Verification of connectivity

To protect against deliberate or accidental misconnection, mechanisms can be put in place to verify both end-to-end connectivity and segment-by-segment resources. These mechanisms can trace the routes of LSPs in both the control plane and the data plane. Note that the connectivity verification tools are now developed for general MPLS networks as well.

The defense techniques that apply generally to MPLS/GMPLS are not detailed here; see [RFC5920] for details regarding these techniques. For example:

  1. Authentication, including management system authentication, peer-to-peer authentication, and cryptographic techniques for authenticating identity
  1. Access control techniques
  1. Use of aggregated infrastructure
   4) Mitigation of denial-of-service attacks
  1. Monitoring, detection, and reporting of security attacks

It is important to point out the following security defense techniques, as they are particularly critical for NMSs, due to the strong emphasis on static provisioning supported by NMSs in MPLS-TP deployments. These techniques include the following:

  • entity authentication for identity verification
  • encryption for confidentiality
  • message integrity and replay detection to ensure the validity of message streams
  • user access control and event logging, which must be applied for NMSs and provisioning applications

5. Security Considerations

Security considerations constitute the sole subject of this document and hence are discussed throughout.

This document evaluates security risks specific to MPLS-TP, as well as mitigation mechanisms that may be used to counter potential threats. All of the techniques presented here involve mature and widely implemented technologies that are practical to implement. It is meant to assist equipment vendors and service providers who must ultimately decide what threats to protect against in any given configuration or service offering, from a customer's perspective as well as from a service provider's perspective.

6. Acknowledgements

The authors wish to thank the following people: Joel Halpern and Gregory Mirsky for their review comments and contributions to this document, Mach Chen for his review and suggestions, Adrian Farrel for his Routing Area Director review and detailed comments, Loa Andersson for his continued support and guidance as the MPLS WG co-chair, and Dan Romascanu and Barry Leiba for their helpful comments during IESG review.

7. References

7.1. Normative References

   [RFC5654]  Niven-Jenkins, B., Ed., Brungard, D., Ed., Betts, M., Ed.,
              Sprecher, N., and S. Ueno, "Requirements of an MPLS
              Transport Profile", RFC 5654, September 2009.
   
   [RFC5920]  Fang, L., Ed., "Security Framework for MPLS and GMPLS
              Networks", RFC 5920, July 2010.

7.2. Informative References

   [RFC5921]  Bocci, M., Ed., Bryant, S., Ed., Frost, D., Ed., Levrau,
              L., and L. Berger, "A Framework for MPLS in Transport
              Networks", RFC 5921, July 2010.

Contributors

   Raymond Zhang
   Alcatel-Lucent
   750D Chai Chee Road
   Singapore  469004
   
   EMail: raymond.zhang@alcatel-lucent.com
   
   Nabil Bitar
   Verizon
   40 Sylvan Road
   Waltham, MA  02145
   US
   
   EMail: nabil.bitar@verizon.com
   
   Masahiro Daikoku
   KDDI Corporation
   3-11-11 Iidabashi, Chiyodaku, Tokyo
   Japan
   
   EMail: ms-daikoku@kddi.com

Lei Wang
Lime Networks
Strandveien 30, 1366 Lysaker
Norway

   EMail: lei.wang@limenetworks.no
   
   Henry Yu
   TW Telecom
   10475 Park Meadow Drive
   Littleton, CO  80124
   US
   
   EMail: henry.yu@twtelecom.com

Authors' Addresses

   Luyuan Fang (editor)
   Cisco Systems
   111 Wood Ave. South
   Iselin, NJ  08830
   US

EMail:

          lufang@cisco.com
   
   Ben Niven-Jenkins (editor)
   Velocix
   326 Cambridge Science Park
   Milton Road
   Cambridge  CB4 0WG
   UK
   
   EMail: ben@niven-jenkins.co.uk
   
   Scott Mansfield (editor)
   Ericsson
   300 Holger Way
   San Jose, CA  95134
   US
   
   EMail: scott.mansfield@ericsson.com
   
   Richard F. Graveman (editor)
   RFG Security, LLC
   15 Park Avenue
   Morristown, NJ  07960
   US

EMail:

          rfg@acm.org