5. Preprocessor

Before the Pike code is sent to the compiler it is fed through the preprocessor. The preprocessor converts the source code from its character encoding into the Pike internal representation, performs some simple normalizations and consistency checks and executes the "preprocessor directives" that the programmer may have put into the file. The preprocessor directives are like a very simple programming language that allows for simple code generation and manipulation. The code preprocessor can be called from within Pike with the cpp call.

5.1. Charset Heuristics

Pike code is Unicode enabled, so the first thing the preprocessor has to do is to try to determine the character encoding of the file. It will first look at the two first bytes of the file and interpret them according to this chart.

• With any other combination of bytes the preprocessor will assume iso-8859-1 encoding until a #charset directive has been found.
• The file must be an multiple of 4 or 2 bytes in order to be correctly decoded as 32bit or 16bit wide string.
• It's an error for a program written in EBCDIC not to start with a #charset directive.
• For obfuscation it is possible to encode the #charset directive in a different charset than the charset stated in the #charset directive.

5.2. Code Normalization

The preprocessor collapses all consecutive white space characters outside of strings, except for newlines, to single space characters. All // and /**/ comments are removed, as are #! lines. Pike considers ANSI/DEC escape sequences as white space. Supported formats are <ESC>[\040-\077]+[\100-\177] and <CSI>[\040-\077]*[\100-\177]. Note that this means that it is possible to do color markup in the actual source file.

The preprocessor will treat seven consecutive < characters outside of a string as an version control conflict error and will return "Merge conflict detected."

5.3. Defines and Macros

Defining macros or constants is one of the most used preprocessor features. It enables you to make abstractions on a code generation level as well as altering constants cross-application. The simplest use of the #define directive however is to declare a "define" as present.

#define DO_OVERSAMPLING

The existence of this definition can now be used by e.g. #ifdef and #ifndef to activate or deactivate blocks of program code.

#ifdef DO_OVERSAMPLING
  // This code is not always run.
  img->render(size*4)->shrink(4);
#endif

Note that defines can be given to pike at execution time. In order to set DO_OVERSAMPLING from a command line, the option -DDO_OVERSAMPLING is added before the name of the pike program. E.g. pike -DDO_OVERSAMPLING my_program.pike.

A define can also be given a specific value, which will be inserted everywhere the define is placed in the source code.

#define CYCLES 20

void do_stuff() {
  for(int i; i<CYCLES; i++) do_other_stuff();
}

Defines can be given specific values on the command line too, just be sure to quote them as required by your shell.

~% pike '-DTEXT="Hello world!"' -e 'write("%s\n", TEXT);'
Hello world!

Finally #define can also be used to define macros. Macros are just text expansion with arguments, but it is often very useful to make a cleaner looking code and to write less.

#define VAR(X) id->misc->variable[X]
#define ROL(X,Y) (((X)<<(Y))&7+((X)>>(8-(Y))))
#define PLACEHOLDER(X) void X(mixed ... args) { \
  error("Method " #X " is not implemented yet.\n"); }
#define ERROR(X,Y ...) werror("MyClass" X "\n", Y)
#define NEW_CONSTANTS(X) do{ int i=sizeof(all_constants()); \
    X \
    werror("Constant diff is %d\n", sizeof(all_constants())-i); \
  }while(0)
#define MY_FUNC(X,Y) void my##X##Y()

• A macro can have up to 254 arguments.
• It can be wise to put extra parentheses around the arguments expanded since it is a purely textual expansion. E.g. if the macro DOUBLE(X) is defined as X*2, then DOUBLE(2+3) will produce 2+3*2, probably producing a hard to track down bug.
• Since the preprocessor works with textual expansion, it will not evaluate its arguments. Using one argument several time in the macro will thus cause it to evaluated several times during execution. E.g. #define MSG(X) werror("The value "+(X)+" can differ from "+(X)+"\n") when called with MSG(random(1000));.
• A backslash (\) at the end of the line can be used to make the definition span several lines.
• It is possible to define macros with a variable list of arguments by using the ... syntax.
• Macros are often formulated so that a semicolon after it is apropriate, for improved code readability.
• In Pike code macros and defines are most often written in all caps.
• If a macro expands into several statements, you are well advised to group them together in containment block, such as do { BODY } while(0). If you do not, your macro could produce other hard to track down bugs, if put as a loop or if body without surrounding curly braces.
• A hash (#) in front of a macro variable "casts" it to a string.
• A double hash (##) in front of a macro variable concatenates it with the text before it.

5.4. Preprocessor Directives

All of the preprocessor directives except the string-related (#string and #"") should have the hash character (#) as the first character of the line. Even though it is currently allowed to be indented, it is likely that this will generate warnings or errors in the future. Note that it is however allowed to put white-space between the hash character and the rest of the directive to create indentation in code.

Directive#!

#!

Description

All lines beginning with #! will be regarded as comments, to enable shell integration. It is recommended that Pike applications begin with the line "#! /usr/bin/env pike" for maximum cross platform compatibility.

Directive#line
Directive#<integer>

#line
#<integer>

Description

A hash character followed by a number or by the string "line" and a number will make the preprocessor line counter set this number as the line number for the next line and adjust the following lines accordingly.

All error messages from Pike will use these line numbers.

Optionally the number may be followed by a file name, e.g. #line 1 "/home/pike/program.pike.in". Then this filename will be used instead of the current file for error messages.

Directive#""

#""

Description

If a string literal is opened with #" newlines in the string will end up in the string literal, instead of triggering a "newline in string" error.

Note

Newlines will be converted to \n characters in the string even if the newlines in the file are something else.

This preprocessor directive may appear anywhere a string may appear.

See also

#string

Directive#(#)
Directive#[#]
Directive#{#}

#(#)
#[#]
#{#}

Description

If a string literal is opened with #( all subsequent characters until the closing #) will be treated as literals, including newlines, \, " and '.

There are three different pairs of start/end tokens for this type of literals, #( and #), #[ and #], and #{ and #}.

Example

#["\n\'##] is equivalent to "\"\\n\\'#".

Directive#string

#string

Description

The preprocessor directive #string will load the file in the string that follows and insert its contents as a string. This preprocessor directive may appear anywhere a string may appear.

Example

do_something(#string"the_file.wks");

See also

#include

Directive#include

#include

Description

#include is used to insert the contents of another file into the processed file at the place of the include directive.

Files can be referenced either by absolute or relative path from the source file, or searched for in the include paths.

To include a file with absolute or relative path, use double quotes, e.g. #include "constants.pike" or #include "../debug.h".

To include from the include paths, use less than and greater than, e.g. #include <profiling.h>.

It is also possible to include a file whose path is defined in a preprocessor macro, e.g. #include USER_SETTINGS.

Directive#if

#if

Description

The #if directive can evaluate simple expressions and, if the expression is evaluates to true, "activate" the code block that follows. The code block ends when an #endif, #else, #elseif or #elif block is encountered at the same nesting depth.

The #if expressions may include defines, integer, string and float constants, ?:, || and && operations, ~, ^, !, | and & operations, <, >, <=, >=, == and != operations, +, -, *, /, << and >> operations and paranthesis.

Strings may also be indexed with the [] index operator. Finally there are three special "functions" available in #if expressions; defined(), efun() and constant().

See also

#ifdef, #ifndef, #elif, #else, #endif, defined(), constant(), efun()

Directive#ifdef

#ifdef

Description

Check whether an identifier is a macro.

The directive

#ifdef <identifier>

is equivalent to

#if defined(<identifier>)

See also

#if, #ifndef, defined

Directive#ifndef

#ifndef

Description

Check whether an identifier is not a macro.

This is the inverse of #ifdef.

The directive

#ifndef <identifier>

is equivalent to

#if !defined(<identifier>)

See also

#if, #ifdef, defined

Directive#endif

#endif

Description

End a block opened with #if, #ifdef, #ifndef, #else, #elseif or #elif.

Example

#ifdef DEBUG
    do_debug_stuff();
  #endif // DEBUG

Directive#else

#else

Description

This directive is used to divide the current code block into another code block with inverse activation.

Example

#ifdef FAST_ALGORITHM
    do_fast_algorithm();
  #elif defined(EXPERIMENTAL_ALGORITHM)
    do_experimental_algorithm();
  #else
    do_default_algorithm();
  #endif

Directive#elif
Directive#elseif

#elif
#elseif

Description

These work as a combined #else and #if without adding an extra level of nesting.

Example

The following two are equivalent:
#ifdef A
    // Code for A.
  #else
  #ifdef B
    // Code for B.
  #else
  #ifdef C
    // Code for C.
  #else
    // Code for D.
  #endif
  #endif
  #endif
And
#ifdef A
    // Code for A.
  #elif defined(B)
    // Code for B.
  #elseif defined(C)
    // Code for C.
  #else
    // Code for D.
  #endif

See also

#if, #ifdef, #else, defined(), constant()

Directive#elifdef
Directive#elseifdef

#elifdef
#elseifdef

Description

These work as a combined #else and #ifdef without adding an extra level of nesting.

Example

The following two are equivalent:
#ifdef A
    // Code for A.
  #else
  #ifdef B
    // Code for B.
  #else
  #ifdef C
    // Code for C.
  #else
    // Code for D.
  #endif
  #endif
  #endif
And
#ifdef A
    // Code for A.
  #elifdef B
    // Code for B.
  #elseifdef C
    // Code for C.
  #else
    // Code for D.
  #endif

See also

#if, #ifdef, #else, defined(), constant()

Directive#elifndef
Directive#elseifndef

#elifndef
#elseifndef

Description

These work as a combined #else and #ifndef without adding an extra level of nesting.

Example

The following two are equivalent:
#ifndef A
    // Code for not A.
  #else
  #ifndef B
    // Code for not B.
  #else
  #ifdef C
    // Code for not C.
  #else
    // Code for ABC.
  #endif
  #endif
  #endif
And
#ifndef A
    // Code for not A.
  #elifndef B
    // Code for not B.
  #elseifndef C
    // Code for not C.
  #else
    // Code for ABC.
  #endif

See also

#if, #ifdef, #else, defined(), constant()

Directive#define

#define

Description

This directive is used to define or redefine a cpp macro.

The simplest way to use define is to write

#define <identifier> <replacement string>

which will cause all subsequent occurances of <identifier to be replaced with the <replacement string>.

Define also has the capability to use arguments, thus a line like

#define <identifier>(arg1, arg2) <replacement string>

would cause <identifer> to be a macro. All occurances of '<identifier>(something1,something2d)' would be replaced with the <replacement string>. And in the <replacement string>, arg1 and arg2 will be replaced with something1 and something2.

Directive#undef
Directive#undefine

#undef
#undefine

Description

This removes the effect of a #define, all subsequent occurances of the undefined identifier will not be replaced by anything.

Note

Note that when undefining a macro, you just give the identifer, not the arguments.

Example

// Strip debug
   #define werror(X ...) 0
   #include "/home/someone/experimental/stuff.h"
   #undef werror

See also

#define, defined()

Directive#charset

#charset

Description

Inform the preprocessor about which charset the file is encoded with. The Charset module is called with this string to decode the remainder of the file.

Directive#pike

#pike

Description

Set the Pike compiler backward compatibility level.

This tells the compiler which version of Pike it should attempt to emulate from this point on in the current compilation unit.

This is typically used to "quick-fix" old code to work with more recent versions of Pike.

Example

// This code was written for Pike 7.2, and depends on
  // the old behaviour for 7.2::dirname().
  #pike 7.2

  // ... Code that uses dirname() ...
This directive is also needed for Pike modules that
   have been installed globally, and might be used by
   a Pike that has been started with the -V flag.

Example

// Pike modules that are bundled with Pike are
  // typically written for the same version of Pike.
  #pike __REAL_VERSION__

Directive#pragma

#pragma

Description

This is a generic directive for flags to the compiler.

These are some of the flags that are available:

"all_inline"	This is the same as adding the modifier inline to all functions that follow.
"all_final"	Instructs the compiler to mark all symbols as final.
"deprecation_warnings"	Enable warnings for use of deprecated symbols (default).
"no_deprecation_warnings"	Disable warnings for use of deprecated symbols. This is typically used in code that implements the deprecated symbols.
"save_parent"	Cause nested classes to save a reference to their surrounding class even if not strictly needed.
"dont_save_parent"	Inverse of "save_parent". This is needed to override if the global symbol predef::__pragma_save_parent__ has been set.
"strict_types"	Enable warnings for all cases where the compiler isn't certain that the types are correct.
"disassemble"	Enable disassembly output for the code being compiled. Note that this option essentially has a function-level scope, so enabling it for just a few lines is usually a noop. This is similar to Debug.assembler_debug() level 3.
"no_disassemble"	Disable disassembly output (default).

Directive#require

#require

Description

If the directive evaluates to false, the source file will be considered to have failed dependencies, and will not be found by the resolver. In practical terms the cpp() call will return zero.

See also

#if

Directive#warning

#warning

Description

Generate a warning during preprocessing.

This directive causes a cpp warning, it can be used to notify the user that certain functions are missing and similar things.

Example

#if !constant(Yp)
  #warning Support for NIS not available. Some features may not work.
  #endif

See also

#error

Directive#error

#error

Description

Throw an error during preprocessing.

This directive causes a cpp error. It can be used to notify the user that certain functions are missing and similar things.

Note

Note that this directive will cause cpp() to throw an error at the end of preprocessing, which will cause any compilation to fail.

Example

#if !constant(Yp)
  #error Support for NIS not available.
  #endif

See also

#warning

5.5. Predefined defines

Constant__VERSION__

constant__VERSION__

Description

This define contains the current Pike version as a float. If another Pike version is emulated, this define is updated accordingly.

See also

__REAL_VERSION__

Constant__MAJOR__

constant__MAJOR__

Description

This define contains the major part of the current Pike version, represented as an integer. If another Pike version is emulated, this define is updated accordingly.

See also

__REAL_MAJOR__

Constant__MINOR__

constant__MINOR__

Description

This define contains the minor part of the current Pike version, represented as an integer. If another Pike version is emulated, this define is updated accordingly.

See also

__REAL_MINOR__

Constant__BUILD__

constant__BUILD__

Description

This constant contains the build number of the current Pike version, represented as an integer. If another Pike version is emulated, this constant remains unaltered.

See also

__REAL_MINOR__

Constant__REAL_VERSION__

constant__REAL_VERSION__

Description

This define always contains the version of the current Pike, represented as a float.

See also

__VERSION__

Constant__REAL_MAJOR__

constant__REAL_MAJOR__

Description

This define always contains the major part of the version of the current Pike, represented as an integer.

See also

__MAJOR__

Constant__REAL_MINOR__

constant__REAL_MINOR__

Description

This define always contains the minor part of the version of the current Pike, represented as an integer.

See also

__MINOR__

Constant__REAL_BUILD__

constant__REAL_BUILD__

Description

This define always contains the minor part of the version of the current Pike, represented as an integer.

See also

__BUILD__

Constant__DATE__

constant__DATE__

Description

This define contains the current date at the time of compilation, e.g. "Jul 28 2001".

Constant__TIME__

constant__TIME__

Description

This define contains the current time at the time of compilation, e.g. "12:20:51".

Constant__FILE__

constant__FILE__

Description

This define contains the file path and name of the source file.

Constant__DIR__

constant__DIR__

Description

This define contains the directory path of the source file.

Constant__LINE__

constant__LINE__

Description

This define contains the current line number, represented as an integer, in the source file.

Variable__COUNTER__

int(1..)__COUNTER__

Description

This define contains a unique counter (unless it has been expanded Int.NATIVE_MAX times) represented as an integer.

Constant__AUTO_BIGNUM__

constant__AUTO_BIGNUM__

Description

This define is defined when automatic bignum conversion is enabled. When enabled all integers will automatically be converted to bignums when they get bigger than what can be represented by an integer, hampering performance slightly instead of crashing the program. This define is always set since Pike 8.0.

Constant__NT__

constant__NT__

Description

This define is defined when the Pike is running on a Microsoft Windows OS, not just Microsoft Windows NT, as the name implies.

Constant__PIKE__

constant__PIKE__

Description

This define is always true.

Constant__amigaos__

constant__amigaos__

Description

This define is defined when the Pike is running on Amiga OS.

Constant__APPLE__

constant__APPLE__

Description

This define is defined when the Pike is running on MacOS X.

Constant__HAIKU__

constant__HAIKU__

Description

This define is defined when the Pike is running on Haiku.

Method_Pragma

void_Pragma(stringdirective)

Description

This macro inserts the corresponding #pragmadirective in the source.

e.g. _Pragma("strict_types") is the same as #pragma strict_types .

See also

#pragma

Constantstatic_assert

constantstatic_assert

Description

This define expands to the symbol _Static_assert.

It is the preferred way to perform static (ie compile-time) assertions.

Note

The macro can also be used to check for whether static assertions are supported.

See also

predef::_Static_assert()

5.6. Test functions

These functions are used in #if et al expressions to test for presence of symbols.

Methodconstant
Methodefun

boolconstant(mixedidentifier)
__deprecated__boolefun(mixedidentifier)

Description

Check whether the argument resolves to a constant or not.

See also

#if, defined()

Methoddefined

booldefined(mixedidentifier)

Description

Check whether an identifier is a cpp macro or not.

Returns

defined returns true if the symbol given as argument is defined.

Note

#if defined(MY_DEF) is equivalent to #ifdef MY_DEF.

See also

#if, #ifdef, constant()